CDM - Innovative Wireless Solutions
      Made in the USA
A Leading Provider in Digital Wireless Solutions

Raptor e Series

300 Mbps MIMO

Raptor e Series

View Printable Version of Product Specs Sheet (PDF)

CDM Wireless, a leader in PtP & PtMP wireless broadband, introduces its new Raptor "e Series" product line. Higher bandwidth applications are becoming increasingly common as advancements in manufacturers hardware continue. The CDM Wireless Raptor MIMO product line helps to satisfy this need.

External antennas such as Sectors, Omnis, patch or parabolic combined with the Raptor e series makes it an extremely versatile device for almost any PtP, PtMP or Mesh application.

With actual data rates up to 200 Mbps the new Raptor series delivers even more capacity than our Viper series and allows users to stream even higher resolution images, video, live recordings, VoIP, etc.

The Raptor and Viper equipment can easily be combined into any hybrid deployment that requires less bandwidth at the edge and more at the head end.

On projects where 200 Mbps or more is not needed at remote locations, but is needed at the head end to receive multiple data streams, a combination of Raptor and Viper devices can be deployed at a considerable cost savings to the customer.

Raptor products act as either Power Sourcing Equipment (PSE) or Powered Devices (PD). PSE models will supply PoE+ power to one or two IP devices such as Cameras, Door Access Controllers, VOIP phones, etc. The PD models will accept power from a PoE switch or a 48Vdc injector.

Raptor products include all software, licenses, accessories and unlimited bandwidth.

RAPTOR e Series

Raptor e31r (7202AP), Raptor e32r (7203AP), Raptor e21s, Raptor e31s (7202T)

Wireless Interface
2.4 / 5.1 GHz - 5.8 GHz
Data Rates300 Mbps modulation
Transmit Power17 - 26 dBm (radio dependent)
Receiver Sensitivity
2.4 GHzMCS0 20MHz - 94dBi, MCS7 40MHz - 75dBi
5 GHzMSC0 20MHz - 97dBi, MCS7 40MHz - 74dBi
RangeUp to 10 miles (depending on environment)
Input48Vdc via injector and/or PoE (802.3af) switch (model dependent)
PSEPoE+ (802.3at) on up to 2 Ethernet ports
Power consumption11 watts maximum (4 watts typical)
Ethernet Interface
1 - 3Gigabit Fast Ethernet ports with Auto-MDI/X
Authentication, Security and Encryption
AuthenticationRADIUS server MAC enabled
SecuritySSL based authentication
Remote AdminSSH, IP/MAC Telnet, Win GUI, HTTPS, FTP, Serial Console
EncryptionAES, 128.256, Triple DES with CBC-MAC, RADIUS, EAP
GPS SupportAsync NMEA 0183, NMEA/RTCM or simple text
Temperature-67°F to 159.8°F (-55°C to 71°C)
Solar RadiationASTM G53 1000 hours
Ice Load25mm radial
Salt FogIEC 68-2-11 Ka 500 hours
Size12" x 12" x 2.75"
Weight7 lbs.
Antenna Connectors2 to 6 Type-N
External Connectors
Receivers1 weatherized RJ-45 for cable or conduit
Transmitters1 weatherized feed thru for cables or conduit
LEDsPower, Activity, Ethernet Link
Mountingmast, pole or wall
VibrationIEC 60721-3-4 4M5 Random
MechanicalIEC 60721-3-4 4M5
DC Ground
Systems Management and Control
Local/Remote AdministrationSSH, MAC Telnet, WIN GUI via HTTP, FTP
Tools / Diagnostics
•  Bandwidth
•  Ping
•  Netwatch
•  Freq Scan
•  IP Scan
•  Traffic Monitor
•  Ping Speed
•  Email
•  Packet Sniffer
   Antenna Alignment
•  Graphing
•  Trace Route
•  MAC Server
•  Flood Ping

Key Features

  • Requires External Antenna(s)
  • PtP, PtMP or Mesh
  • MIMO, Up to 200 Mbps actual throughput
  • PoE 802.3af/at (PoE, PoE+)
  • SNMP technology ensures hassle free integration with existing networks
  • 1-3 Ethernet ports
  • 1-3 Radios
  • PoE injector & mounting kit
  • Maintains PtP & PtMP links up to 10 miles
  • VLAN support for increased security
  • Windows-based GUI, Command Line Interface & Web Browser-based for programming & monitoring
  • Factory programmed, configured, identified & link tested
  • Type-N connectors

Raptor e31r (7202AP)
Triple Ethernet, PoE Access Point
Powered via switch or factory supplied power injector Includes 2-Type N connectors for MIMO antenna

Raptor e32r (7203AP)
Triple Ethernet, Dual Radio PoE Access Point
Powered via switch or factory supplied power injector Includes 4-Type N connectors for 2 MIMO antennas

Raptor e21s
Dual Ethernet PoE+ Remote Transmitter
Powered via factory supplied PoE injector Provides PoE+ power to IP device on Ethernet 2

Raptor e31s (7202T)
Triple Ethernet, PoE+ Remote Transmitter
Powered via factory supplied PoE injector Provides PoE+ power to IP devices on Ethernet 2 & 3