 SunSmart Series
Solar Electric Power Systems
View Printable Version of Product Specs Sheet (PDF)
The CDM Wireless SunSmart product line is a self contained 12/24 Vdc Solar Electric Power System designed for remote wireless surveillance applications. It is designed for quick installation, long term reliability and virtually no maintenance.
Each solar installation is slightly different due to specific power requirements and geographic location. If CDM Wireless does not already have a model designed to meet the requirements they will design one that will.
Designed for industrial applications, the SunSmart product line delivers exceptional performance in all weather conditions. All systems ship factory assembled, wired and include all hardware and accessories needed to install it on a utility pole.
The CDM Wireless solar electric power system provides up to 510 Amp Hours of power to operate equipment in the event of a temporary weather related, or other, adverse event. It includes an intelligent technology power system that will disconnect the battery from the wireless and security equipment in the event the voltage drops below 11.6 volts. As the batteries recharge, the system brings the devices back online. As the batteries recharge, the system brings the devices back online, significantly prolonging the life of the battery(s).
In addition to providing reliable power the SunSmart Series can be equipped with an optional Status and Alert module. The Status and Alert module provides real time measurements of the voltage output of the solar panel(s) and battery bank plus temperature data. The status can be in the form of a simple web based applica- tion or provide additional data and logging. Alerts can be sent via email or monitored by software such as Nagios or other network monitoring software.
SunSmart Series: Hardware Specifications
| Solar Panel(s) |
|
Model 110 |
Model 135 |
Model 210 |
Model 210X * |
Model 240 |
Model 480 * |
Model XXX |
| Pmax | 54 watts | 135 watts | 210 watts | 210 watts | 240 watts | 480 watts | Custom
Designed
for
Customer |
| Voc | 21.7V | 22.1V | 33.2V | 33.2V | 36V | 72V |
| Isc | 3.31A | 8.37A | 8.58A | 8.58A | 8.96A | 17.9A |
| Vpm | 17.4V | 7.7V | 26.6V | 26.6V | 30V | 60V |
| Ipm | 3.11A | 7.63A | 7.90A | 7.90A | 8.0A | 16.0A |
| Dimensions | 25.7" L
50" W
2.1" H | 59.1" L
26.3" W
1.4" D | 59.1" L
39" W
1.4" D | 59.1" L
39" W
1.4" D | 64.96" L
39.05" W
1.81" D | 64.96" L
78.1" W
1.81" D |
| Weight | 22.0 lbs | 28.7 lbs | 40.8 lbs | 40.8 lbs | 42 lbs | 84 lbs |
| Window Load | 125 mph | 125 mph | 125 mph | 125 mph | 125 mph | 125 mph |
|
| Battery(s) |
| Voltage: | 12vdc or 24vdc |
| Amps: | 255 AH (Model 210X is 510 AH) |
| Construction: | AGM Deep Cell Solar |
| Dimensions: | 20.62"L x 10.95"W x 10.17"H |
| Weight: | 165 lbs |
| Smart Technology Power Controller |
| Peak Efficiency: | 97.5% |
| Nom Battery Voltage: | 12 or 24 volts |
| Max Battery Current: | 15 Amps |
| Battery Voltage Range: | 7-36 volts |
| Max PV Open Circuit voltage: | 75 volts |
| Nominal Max PV Input: | 200 watts @12v |
| Output Rating: | 15 Amps load control |
| Self Consumption: | 35ma |
| Transient Surge Protection: | 4 x 1500 Watts |
| Operating Temp: | -40c to +60c |
| Electronic Protections: | Overload, short circuit, high voltage, reverse polarity, battery, PV & load, lightning & transient surges, high temp, reverse current at night. |
| Weather proof battery box |
| Vented aluminum enclosure with side of pole mounting bracket system Dimensions 25"x18"x18" |
| Side of pole solar panel/battery mounts |
| 5052 H32 Aluminum, cold roll steel and special high strength hot roll steel for top of pole braces, tilt plates and cross rails to stay in compliance with the 125 mph wind load rating |
* Model 210X has 510AH Amps and (2) Batteries
* Model 480 has (2) Solar Panels
|
