VIPER 2201-AP
Dual Port, 54mbps 802.3af Access Point with integrated antenna
View Printable Version of Product Specs Sheet (PDF)
The Viper 2201-AP wireless access point is manufactured for indoor and outdoor applications. This device can be powered from an 802.3af PoE switch or the standard 48vdc injector kit. Connections are made on the outside of the unit eliminating the need for the installer to open the unit.
The 120V/240V PoE injector provides 48 Vdc power and data to the device while maintaining 11 watts maximum of power consumption. It also has a data port that can be connected to a DVR, NVR, switch, computer, etc.
The access point has a wireless range of 10+ miles and is designed for quick, smooth installations. It ships from the factory programmed, configured and link tested. No further programming is required by the installer.
VIPER 2200 Product Series (802.3af)
Viper 2201-AP, Viper 2201-T
| Wireless Interface |
| Radio Transceiver(s) | Atheros multi-channel high performance transceiver |
| Frequency |
| IEEE 802.11a | 4.9 GHz - 6.1 GHz |
| IEEE 802.11b/g | 2.3 GHz - 2.5 GHz |
|
| Data Rates | SuperA/G supports data rate up to 108 Mbps in 802.11a turbo mode and 802.11g super mode; 54 Mbps in standard 802.11a and 802.11g mode |
| Modulation | OFDM |
| Transmit Power | 65 mw – 400 mw (depending on radio) |
| Receiver Sensitivity |
| 802.11b | -95dBm @ 1Mbps -90dBm @ 11Mbps |
| 802.11g | -90dBm @ 6Mbps -74dBm @ 54Mbps |
| 802.11a | -88dBm @ 6Mbps -71dBm @ 54Mbps |
|
| Range | Up to 10 miles1 depending on environment |
| Power |
| 802.3af | Compliant on Ethernet 1 (works as a PD device). Can also be powered using standard 48 VDC PoE Injector kit |
| External power supply | 120/240 VAC 50/60 Hz |
| Power consumption | 11 watts maximum |
| Ethernet Interface |
| Transmitter |
| Ethernet 1 | 10/100 Mbit/s Fast Ethernet port with Auto-MDI/X |
| Ethernet 2 | 802.3af (PSE) 10/100 Mbit/s Fast Ethernet port with Auto-MDI/X |
|
| AP |
| Ethernet 1 | 802.3af (PD) 10/100 Mbit/s Fast Ethernet port with Auto-MDI/X |
|
| Authentication, Security and Encryption |
| Authentication | RADIUS server MAC enabled |
| Security | SSL based authentication |
| Remote Admin | SSH, IP/MAC Telnet, Win GUI, HTTPS, FTP, Serial Console |
| Encryption | AES, 128/256, Triple DES with CBC-MAC, RADIUS, EAP |
| VPN | EoIP, VLAN, PPoE, PPTP, IPIP, L2TP |
| Protocols | RTP/IP, UDP/IP, TCP/IP, HTTPS, VRRP, NTP, DNS, DHCP, ARP, WDS |
| GPS Support | Async NMEA 0183, NMEA/RTCM or simple text |
| Environmental |
| Rating | IP67 |
| Temperature | -40°F to 149°F (-40°C to 65°C) |
| Humidity | 100% (wind driven rain) |
| Enclosure |
| Size | 10” x10” x 3.5” |
| Weight | 3.75 lbs. |
| Universal Mounting System | |
| Weatherproofing Hardware | |
| System power LED | |
| Grounding |
| DC Ground | |
| Systems Management and Control |
| Local/Remote Administration | SSH, MAC Telnet, WIN GUI via HTTP, FTP |
| Monitoring and Accounting | IP traffic accounting, firewall actions logging, statistics graphs accessible via HTTP |
| Management and System Health | Total uptime, uptime of wireless connections, free memory, total memory, CPU freq, CPU load, free HDD space, total HDD space, core temp, voltage, sector writes, monitoring of all local and remote interfaces, watchdog monitor, network monitor and status reporting by time or controlled events. |
| Netwatch and Scripting | Netwatch is a tool used to monitor the wireless and Ethernet interfaces. A series of executable code (scripts) can be configured to report network problems and trigger a response such as send an email, reboot, or create daily backups and FTP the file to a remote server. |
| OS Upgrade | FTP flash memory upgrade via a network connection |
| BIOS Upgrade | XModem protocol using DHCP/BOOTP and TFTP protocols through the Ethernet network |
| Tools / Diagnostics |
| |
• Bandwidth Test
• Email
• BTest Server
• Flood Ping
|
• Ping
• Ping Speed
• Graphing
• MAC Server
|
• Netwatch
• Packet Sniffer
• Telnet
• Trace Route
|
• Traffic Monitor
• IP Scan
• Frequency Scan
• Antenna Alignment
|
|
|
Powering Made Simple
Unique to the CDM product line, the Viper 2201-AP can be powered from an 802.3af PoE switch or the standard 48vdc injector kit. The 2201-T is powered with the standard 48v injector kit and provides PoE power on Ethernet 2 for IP devices. This versatility enables the products to be compliant with the most current advances being made in the IP industry.
Access and Management of the Network
The CDM Viper 2200 product series allows users access to the entire network infrastructure from any device they wirelessly connect to. All diagnostics, changes, reporting, etc. is done via the GUI interface. Remote management from a centralized location can be done from any device.
Access to Network Edge Devices
All surveillance cameras or other equipment can be accessed from any Transmitter or AP as long as it is on the network. Any number of IP cameras or devices can be used with the only limiting factor being bandwidth3.
Industrial Grade Equipment
Manufactured for various indoor and outdoor applications, each connection is made on the outside of the device. The 2200 series products each have 2 Ethernet ports for power and data. The Viper 2200 series has a cast aluminum powder coated enclosure that is IP-67-rated to withstand all weather conditions.
Frequency and Encryption Versatility
The Viper 2200 series products are versatile and operate in the 2.4 GHz, 4.9 GHz and 5 GHz bands. In addition, they incor- porate advanced encryption technologies and industry standard Quality of Service (QoS).
Tx/Rx Power Feature Set
By utilizing standard software features the devices have a wireless range of 100 ft to 10 miles1 and are designed for quick, efficient deployments. Radio output power is adjust- able and controlled through the use of software.
Complete Package
The Viper 2200 series products include an integrated antenna, 48 volt power supply, PoE injector, universal mount- ing system and all weatherproofing hardware needed for a complete installation.
Ease of Use
All products ship to the customer programmed, configured, identified and link tested. No further programming or configuration is required by the installation team2. This ensures instant connectivity and less time on the job.
|
