VIPER 5202-AP
Dual Port, Single Radio, 54mbps 802.3af Access Point
View Printable Version of Product Specs Sheet (PDF)
The Viper 5202-AP device can be powered from an 802.3af PoE switch or the standard 48vdc injector kit. This versatility enables the products to be compliant with the most current advances being made in the IP industry and eliminates the integration of additional power supplies. On the 5202-AP device Ethernet 1 is power/data and Ethernet 2 is data only.
This unit is manufactured for indoor and outdoor applications and all connections are made on the outside of the unit eliminating the need for the installer to open the unit.
This device supports multiple antenna configurations i.e. sector, panel, omni, etc. The 2.4 GHz, 4.9 GHz and 5 GHz AP Base has a wireless range of 100ft. to 10+ miles and is designed for quick smooth installations. It comes from the factory preprogrammed and configured and/or configured using specific customer IP information eliminating the need for the installer to do any IP configuration or programming. This ensures reliable connectivity at the time of installation thereby significantly reducing the installation time.
External Antenna(s) required
VIPER 5200 Product Series
Viper 5202-AP, Viper 5202-T, Viper 5203-AP, Viper 5203-RP
| Wireless Interface |
| VIPER 5202 Radio Transceiver(s) | 1 Atheros multi-channel high performance transceiver |
| VIPER 5202 Frequency |
| IEEE 802.11a | 4.9 GHz - 6.1 GHz |
| IEEE 802.11b/g | 2.3 GHz - 2.5 GHz |
|
| VIPER 5202 Data Rates | SuperA/G supports data rate up to 108 Mbps in 802.11a turbo mode and 802.11g super mode; 54 Mbps in standard 802.11a and 802.11g mode |
| VIPER 5203 Radio Transceiver(s) | 2 Atheros multi-channel high performance transceivers |
| VIPER 5203 Frequency |
| IEEE 802.11a | 4.9 GHz - 6.1 GHz |
| IEEE 802.11b/g | 2.3 GHz - 2.5 GHz |
|
| VIPER 5203 Data Rates | SuperA/G supports data rate up to 108 Mbps in 802.11a turbo mode and 802.11g super mode; 54 Mbps in standard 802.11a and 802.11g mode |
| Modulation | OFDM |
| Transmit Power | 17dBm-26dBm (depending on radio) |
| Receiver Sensitivity |
| 802.11b | -95dBm @ 1Mbps -90dBm @ 11Mbps |
| 802.11g | -90dBm @ 6Mbps -74dBm @ 54Mbps |
| 802.11a | -88dBm @ 6 Mbps -71dBm @ 54Mbps |
|
| Range | Up to 10 miles1 depending on environment |
| Power |
| Repeater/Transmitter |
| Input Voltage | 48 VDC via external power supply (supplied) |
| Output Voltage | 802.3af compliant on Ethernet 2 and 3 (works as a PSE device) |
| External power supply | 120/240 VAC 50/60 Hz |
| Power consumption |
14 watts maximum |
|
| AP |
| 802.3af | Compliant on Ethernet 1 (works as a PD device), also can be powered using standard 48 VDC PoE Injector kit |
| External power supply | 120/240 VAC 50/60 Hz |
| Power consumption | 14 watts maximum |
|
| Ethernet Interface |
| Transmitter |
| Ethernet 1 | 10/100 Mbit/s Fast Ethernet port with Auto-MDI/X |
| Ethernet 2 & 3 | 802.3af 10/100 Mbit/s Fast Ethernet port with Auto-MDI/X |
|
| AP |
| Ethernet 1 | 802.3af 10/100 Mbit/s Fast Ethernet port with Auto-MDI/X |
| Ethernet 2 | 10/100 Mbit/s Fast Ethernet port with Auto-MDI/X |
|
| Antenna Connections |
| 5202-AP/5202-T | 1 Type-N female |
| 5203-AP | 2 Type-N females |
| 5203-RP | 1 integrated directional antenna, 1 Type-N Female |
| Authentication, Security and Encryption |
| Authentication | RADIUS server MAC enabled |
| Security | SSL based authentication |
| Remote Admin | SSH, IP/MAC Telnet, Win GUI, HTTPS, FTP, Serial Console |
| Encryption | AES, 128/256, Triple DES with CBC-MAC, RADIUS, EAP |
| VPN | EoIP, VLAN, PPoE, PPTP, IPIP, L2TP |
| Protocols | RTP/IP, UDP/IP, TCP/IP, HTTPS, VRRP, NTP, DNS, DHCP, ARP, WDS |
| GPS Support | Async NMEA 0183, NMEA/RTCM or simple text |
| Environmental |
| Rating | IP67 |
| Temperature | -40°F to 149°F (-40°C to 65°C |
| Humidity | 100% (wind driven rain) |
| Enclosure |
| Size | 10” x10” x 3.5” |
| Weight | 3.75 lbs. |
| Universal Mounting System | Included |
| Weatherproofing Hardware | Included |
| System power LED | Included |
| Grounding |
| DC Ground | |
| Systems Management and Control |
| Local/Remote Administration | SSH, MAC Telnet, WIN GUI via HTTP, FTP |
| Monitoring and Accounting | IP traffic accounting, firewall actions logging, statistics graphs accessible via HTTP |
| Management and System Health | Total uptime, uptime of wireless connections, free memory, total memory, CPU freq, CPU load, free HDD space, total HDD space, core temp, voltage, sector writes, monitoring of all local and remote interfaces, watchdog monitor, network monitor and status reporting by time or controlled events. |
| Netwatch and Scripting | Netwatch is a tool used to monitor the wireless and Ethernet interfaces. A series of executable code (scripts) can be configured to report network problems and trigger a response such as send an email, reboot, or create daily backups and FTP the file to a remote server. |
| OS Upgrade | FTP flash memory upgrade via a network connection |
| BIOS Upgrade | XModem protocol using DHCP/BOOTP and TFTP protocols through the Ethernet network |
| Tools / Diagnostics |
| |
• Bandwidth Test
• Email
• BTest Server
• Flood Ping
|
• Ping
• Ping Speed
• Graphing
• MAC Server
|
• Netwatch
• Packet Sniffer
• Telnet
• Trace Route
|
• Traffic Monitor
• IP Scan
• Frequency Scan
• Antenna Alignment
|
|
|
Powering Made Simple
Unique to the CDM product line, Viper Transmitter & Repeater devices act as Power Sourcing Equipment (PSE) in that they will provide power for 2 IP devices that are 802.3af. Simply connect an IP camera or other device into Ether 2 or 3 and it is fully operational. The Transmitter and Repeater itself is powered using the standard 48vdc injector kit that comes with it.
Viper AP devices can be powered from an 802.3af PoE switch or the standard 48vdc injector kit. This versatility enables the products to be compliant with the most current advances being made in the IP industry and eliminates the integration of additional power supplies.
Access and Management of the Network
The CDM Viper 5200 product series allows users access to the entire network infrastructure from any device they wirelessly connect to. All diagnostics, changes, reporting etc is done via the GUI interface. Remote management from a centralized location can be done from any device.
Access to Network Edge Devices
All surveillance cameras or other equipment can be accessed from any Viper device as long as it is on the network. Any number of IP cameras or devices can be used with the only limiting factor being bandwidth3.
Industrial Grade Equipment
The Viper 5200 series has a cast aluminum powder coated enclosure that is IP-67 rated to withstand all weather conditions. Manufactured for various indoor and outdoor applications, each connection is made on the outside of the device. On the Transmitter & Repeater, Ethernet 1 is power/data and Ethernet 2 & 3 are 802.3af PoE ports. On AP devices Ethernet 1 is power/data and Ethernet 2 is data only.
Frequency and Encryption Versatility
The Viper 5200 series products are versatile and operate in the 2.4 GHz, 4.9 GHz and 5 GHz bands. In addition, they incorporate advanced encryption technologies and industry standard Quality of Service (QoS).
Tx/Rx Power Feature Set
By utilizing standard software features and antenna configurations the devices have a wireless range of 100 ft to 10 miles1 and are designed for quick, efficient deployments. Radio output power is adjustable and controlled through the use of software.
Complete Package
The Viper 5200 series products include a 48 volt power supply, PoE injector, universal mounting system and all weatherproofing hardware needed for a complete installation. No more worries about ordering multiple items or mismatching them.
Ease of Use
All products ship to the customer programmed, configured, identified and link tested. No further programming or configuration is required by the installation team2. This ensures instant connectivity and less time on the job.
|
