VIPER 4200-LK
Single Link, 54mbps 802.3af Access Point & Transmitter
View Printable Version of Product Specs Sheet (PDF)
This system consists of 1 Viper 4201-T & 1 Viper 4201-AP and all related hardware and power requirements needed for installation. All connections are made on the outside of the unit eliminating the need for the installer to open the unit.
The Viper transmitter devices act as Power Sourcing Equipment (PSE) in that they will provide power for two 802.3af IP devices. The Viper AP devices can be powered from an 802.3af PoE switch or the standard 48vdc injector kit. This versatility enables the products to be compliant with the most current advances being made in the IP industry and eliminates the integration of additional power supplies.
By utilizing standard software features the devices have a wireless range of 100 ft. to 10 miles. They come from the factory preprogrammed and configured and/or configured using specific customer IP information eliminating the need for the installer to do any IP configuration or programming. This ensures reliable connectivity at the time of installation thereby significantly reducing the installation time.
VIPER 4200 Product Series (802.3af)
Viper 4201-T, Viper 4201-AP, Viper 4200-LK
| Wireless Interface |
| Radio Transceiver(s) | Atheros multi-channel high performance transceiver |
| Frequency |
| IEEE 802.11a | 4.9 GHz - 6.1 GHz |
| IEEE 802.11b/g | 2.3 GHz - 2.5 GHz |
|
| Data Rates | SuperA/G supports data rate up to 108 Mbps in 802.11a turbo mode and 802.11g super mode; 54 Mbps in standard 802.11a and 802.11g mode |
| Modulation | OFDM |
| Transmit Power | 17dBm-26dBm (depending on radio) |
| Receiver Sensitivity |
| 802.11b | -95dBm @ 1Mbps -90dBm @ 11Mbps |
| 802.11g | -90dBm @ 6Mbps -74dBm @ 54Mbps |
| 802.11a | -88dBm @ 6 Mbps -71dBm @ 54Mbps |
|
| Range | Up to 10 miles1 depending on environment |
| Power |
| Transmitter |
| Input Voltage | 48 VDC via external power supply (supplied) |
| Output Voltage | 802.3af compliant on Ethernet 2 and 3 (works as a PSE device) |
| External power supply | 120/240 VAC 50/60 Hz |
| Power consumption | 11 watts maximum |
|
| AP |
| 802.3af | Compliant on Ethernet 1 (works as a PD device), also can be powered using standard 48 VDC PoE Injector kit |
| External power supply | 120/240 VAC 50/60 Hz |
| Power consumption | 11 watts maximum |
|
| Ethernet Interface |
| Transmitter |
| Ethernet 1 | 10/100 Mbit/s Fast Ethernet port with Auto-MDI/X |
| Ethernet 2 & 3 | 802.3af 10/100 Mbit/s Fast Ethernet port with Auto-MDI/X |
|
| AP |
| Ethernet 1 | 802.3af 10/100 Mbit/s Fast Ethernet port with Auto-MDI/X |
| Ethernet 2 | 10/100 Mbit/s Fast Ethernet port with Auto-MDI/X |
|
| Authentication, Security and Encryption |
| Authentication | RADIUS server MAC enabled |
| Security | SSL based authentication |
| Remote Admin | SSH, IP/MAC Telnet, Win GUI, HTTPS, FTP, Serial Console |
| Encryption | AES, 128/256, Triple DES with CBC-MAC, RADIUS, EAP |
| VPN | EoIP, VLAN, PPoE, PPTP, IPIP, L2TP |
| Protocols | RTP/IP, UDP/IP, TCP/IP, HTTPS, VRRP, NTP, DNS, DHCP, ARP, WDS |
| GPS Support | Async NMEA 0183, NMEA/RTCM or simple text |
| Environmental |
| Rating | IP67 |
| Temperature | -40°F to 149°F (-40°C to 65°C |
| Humidity | 100% (wind driven rain) |
| Enclosure |
| Size | 10” x10” x 3.5” |
| Weight | 3.75 lbs. |
| Universal Mounting System | Included |
| Weatherproofing Hardware | Included |
| System power LED | Included |
| Grounding |
| DC Ground | |
| Systems Management and Control |
| Local/Remote Administration | SSH, MAC Telnet, WIN GUI via HTTP, FTP |
| Monitoring and Accounting | IP traffic accounting, firewall actions logging, statistics graphs accessible via HTTP |
| Management and System Health | Total uptime, uptime of wireless connections, free memory, total memory, CPU freq, CPU load, free HDD space, total HDD space, core temp, voltage, sector writes, monitoring of all local and remote interfaces, watchdog monitor, network monitor and status reporting by time or controlled events. |
| Netwatch and Scripting | Netwatch is a tool used to monitor the wireless and Ethernet interfaces. A series of executable code (scripts) can be configured to report network problems and trigger a response such as send an email, reboot, or create daily backups and FTP the file to a remote server. |
| OS Upgrade | FTP flash memory upgrade via a network connection |
| BIOS Upgrade | XModem protocol using DHCP/BOOTP and TFTP protocols through the Ethernet network |
| Tools / Diagnostics |
| |
• Bandwidth Test
• Email
• BTest Server
• Flood Ping
|
• Ping
• Ping Speed
• Graphing
• MAC Server
|
• Netwatch
• Packet Sniffer
• Telnet
• Trace Route
|
• Traffic Monitor
• IP Scan
• Frequency Scan
• Antenna Alignment
|
|
|
Powering Made Simple
Unique to the CDM product line, Viper Transmitter devices act as Power Sourcing Equipment (PSE) in that it will provide power for two 802.3af IP devices. Simply connect an IP camera or other device into Ether 1 or 2 and it is fully operational. The transmitter itself is powered using the standard 48vdc injector kit that comes with it.
Viper AP devices can be powered from an 802.3af PoE switch or the standard 48vdc injector kit. This versatility enables the products to be compliant with the most current advances being made in the IP industry and eliminates the integration of additional power supplies.
Access and Management of the Network
The CDM Viper 4200 product series allows users access to the entire network infrastructure from any device they are wirelessly connected to. All diagnostics, changes, reporting, etc. is done via the GUI interface. Remote management from a centralized location can be done from any device.
Access to Network Edge Devices
All surveillance cameras or other equipment can be accessed from any Transmitter or AP device as long as it is on the network. Multiple IP cameras or devices can be used with the only limiting factor being bandwidth3.
Industrial Grade Equipment
Manufactured for various indoor and outdoor applications, each connection is made on the outside of the device. On the transmitter Ethernet 1 is power/data and Ethernet 2 and 3 are 802.3af PoE ports. On AP devices Ethernet 1 is power/data and Ethernet 2 is data only. The Viper 4200 series has a cast aluminum powder coated enclosure that is IP-67-rated and will withstand all weather conditions.
Frequency and Encryption Versatility
The Viper 4200 series products are versatile and operate in the 2.4 GHz, 4.9 GHz and 5 GHz bands. In addition, they incorporate advanced encryption technologies and industry standard Quality of Service (QoS).
Tx/Rx Power Feature Set
By utilizing standard software features the devices have a wireless range of 100 ft to 10 miles1 and are designed for quick, efficient deployments. Radio output power is adjustable and controlled through the use of software.
Complete Package
The Viper 4200 Series products include an integrated antenna, 48 volt power supply, PoE injector, universal mounting system and all weatherproofing hardware needed for a complete installation. No more worries about ordering multiple items or mismatching them.
Ease of Use
All products ship to the customer programmed, configured, identified and link tested. No further programming or configuration is required by the installation team2. This ensures instant connectivity and less time on the job.
|
